保溫鋁卷精巧的表面、優秀的質量成為用戶在多領域的選擇，因?yàn)橛猛镜牟煌?，在?yīng)用時需求分外留意。那么，保溫鋁卷在應用時有哪些注意事項呢？下面由鋁卷生產廠家為大家講解一下：
The exquisite surface and excellent quality of thermal insulation aluminum coil have become the choice of users in many fields. Due to different uses, special attention should be paid to the application. So, what are the precautions for the application of thermal insulation aluminum coil? The following is explained by the aluminum coil manufacturer:
保溫鋁卷要求加工成形后不能有一點點變形，為什么以前在市場上買到的保溫鋁卷是在加工后一天或兩天內突然變形？好的預拉伸消除內應力工藝處理，消除內應力，保溫鋁卷在加工和受力時也不會翹曲、開裂及變形。
It is required that the thermal insulation aluminum coil should not be slightly deformed after processing. Why did the thermal insulation aluminum coil purchased in the market suddenly deform one or two days after processing? Good pre stretching process for eliminating internal stress can eliminate internal stress, and the thermal insulation aluminum coil will not warp, crack and deform during processing and stress.
我們?cè)诒劁X卷模具制造過程中深感頭疼的一件事就是在完成了大部分加工工序后，突然發現拋光面上有沙孔或不知名的雜粒出現，而今工件報廢。
One of the headaches we felt in the manufacturing process of insulating aluminum coil mold was that after completing most of the processing procedures, we suddenly found that there were sand holes or unknown particles on the polishing surface, and now the workpiece is scrapped.

晶粒細化工藝保證，全部通過航空航天用鋁合金制品的超聲波探傷工序檢驗，無沙孔、橫紋、氣泡及雜質。保溫鋁卷的熱處理技術卓越，產品在300mm厚度(或直徑)以下，強度、硬度可保持一致。生產工序全部電腦控制，絕少人為偏差，不同批次生產也可保證性能一樣。
The grain refining process ensures that all aluminum alloy products for aerospace use pass the ultrasonic flaw detection process inspection, and there are no sand holes, transverse lines, bubbles and impurities. The heat treatment technology of thermal insulation aluminum coil is excellent, and the strength and hardness of the product can be consistent when the thickness (or diameter) of the product is less than 300mm. The production process is completely controlled by computer, and there is no human error. Different batches of production can also guarantee the same performance.
在進行施工時保溫鋁卷無法一時用完，需要進行妥善的存放。保溫鋁卷在這個季節需要注意的就是防水、防潮。秋季雨水較多，若保溫鋁卷沒有放置在干燥的倉庫內，一旦出現降雨，雨水中含有酸性物質就會造成保溫鋁卷的氧化，氧化后的保溫鋁卷基本成為廢鋁，對施工方來說是重大的損失，所以對于保溫鋁卷的存放一定要加倍重視。
During construction, the thermal insulation aluminum coil cannot be used up for a time, and it needs to be properly stored. In this season, attention should be paid to waterproof and moisture-proof of thermal insulation aluminum coil. There is a lot of rain in autumn. If the thermal insulation aluminum coil is not placed in a dry warehouse, once there is rain, the acid substance contained in the rain will cause the oxidation of the thermal insulation aluminum coil, and the oxidized thermal insulation aluminum coil will basically become waste aluminum, which is a great loss to the construction party. Therefore, we must pay more attention to the storage of the thermal insulation aluminum coil.
保溫鋁卷在加工過程中的可能會遇見一些問題，這就要求大家要在使用前后做好相關的預防準備工作了，更多相關內容就來我們網站http://rtttr1.com咨詢了解吧。
Some problems may be encountered during the processing of thermal insulation aluminum coil, which requires you to make relevant preventive preparations before and after use. For more information, please visit our website http://rtttr1.com Consult and understand.